Izjava o privatnosti: Vaša nam je privatnost vrlo važna. Naša tvrtka obećava da neće otkriti vaše osobne podatke bilo kakvom prozonskom izričitoj dozvoli.
Ms. Shelby Luo
Što mogu učiniti za tebe?
The appearance of ABS engineering plastic is opaque and ivory-colored granules, and its products can be colored colorful and have high gloss. The relative density of ABS is about 1.05, and the water absorption is low. ABS has a good combination with other materials and is easy to print, coat and plate. The oxygen index of ABS is 18-20, which is a flammable polymer. The flame is yellow, black smoke, and emits a special cinnamon smell.
ABS has excellent mechanical properties, and its impact strength is very good. It can be used at extremely low temperatures: ABS has excellent abrasion resistance, good dimensional stability, and oil resistance. It can be used for bearings under medium loads and speeds. ABS has higher creep resistance than PSF and PC, but less than PA and POM. The flexural strength and compressive strength of ABS are the worst among plastics. The mechanical properties of ABS are greatly affected by temperature.
The thermal deformation temperature of ABS is 93 ~ 118 ℃, and the product can be increased by about 10 ℃ after annealing. ABS can still show a little toughness at -40 ℃, and it can be used in the temperature range of -40 ~ 100 ℃.
ABS has good electrical insulation and is almost independent of temperature, humidity and frequency. It can be used in most environments.
October 30, 2024
September 30, 2024
July 03, 2023
July 03, 2023
Pošaljite e-poruku ovom dobavljaču
October 30, 2024
September 30, 2024
July 03, 2023
July 03, 2023
Izjava o privatnosti: Vaša nam je privatnost vrlo važna. Naša tvrtka obećava da neće otkriti vaše osobne podatke bilo kakvom prozonskom izričitoj dozvoli.
Ispunite više informacija kako biste brže kontaktirali s vama
Izjava o privatnosti: Vaša nam je privatnost vrlo važna. Naša tvrtka obećava da neće otkriti vaše osobne podatke bilo kakvom prozonskom izričitoj dozvoli.